S:FLEX mounting systems for trapezoidal and corrugated sheet metal roofs and roofing sheets


Installation with high-bead rail HK 125 XL 50.

The advantages of the HK 125 XL 50:

  • Fast and direct attachment of the rails with rivets or sheet-metal screws on the raised seams.
  • Low material and assembly costs.
  • The 50 mm rail height guarantees a sufficient distance from the roof covering for optimal rear ventilation and use in regions with high temperatures.
  • Available in 125mm length.
  • 24 mm height provide optimised rear ventilation, simplify cable routing and enable installation even on slightly corrugated roof coverings.
  • MHSS HK 125 XL 50 complete is supplied with 2 x 2 holes (5 mm / 6 mm). Comes with sealing tape pre-assembled.
  • Made of weather-resistant aluminium.
  • The XL 50 is only compatible with SolarEdge optimisers.
  • At Solen Energy we an in-house team of expert designers who will plan your custom solar system based on industry-leading technology.

Components


High-bead rail HK 125 XL 50

For horizontal installation of modules on trapezoidal sheet roofs.


sflex-wood-screws

Sheet metal screws

Our sheet-metal screw is approved by building authorities and guarantees high pull-out values. Clean, chip-free installation in one step without pre-drilling.


End and mid clamps

S:FLEX module clamps have an extremely wide clamping area and are therefore suitable for all standard modules and frame heights of 30-50 mm. High torsion resistance and our latest, ultra-smooth one-click technology make installation a snap.


End and mid clamps Hawk HK

Module clamps with a wide clamping area and one-click technology for smooth module installation.


Downloads


An assembly instruction for the HK 125 XL 50 with clamps is available here:

S:FLEX assembly instructions HK 125 XL 50

Planning & Support


If you would like to take advantage of our planning support, you can:

Help Centre

sflex
GSE
vdv
saj

S:FLEX mounting systems for trapezoidal and corrugated sheet metal roofs and roofing sheets


Installation with high-bead rail HK 125 XL 50.

The advantages of the HK 125 XL 50:

  • Fast and direct attachment of the rails with rivets or sheet-metal screws on the raised seams.
  • Low material and assembly costs.
  • The 50 mm rail height guarantees a sufficient distance from the roof covering for optimal rear ventilation and use in regions with high temperatures.
  • Available in 125mm length.
  • 24 mm height provide optimised rear ventilation, simplify cable routing and enable installation even on slightly corrugated roof coverings.
  • MHSS HK 125 XL 50 complete is supplied with 2 x 2 holes (5 mm / 6 mm). Comes with sealing tape pre-assembled.
  • Made of weather-resistant aluminium.
  • The XL 50 is only compatible with SolarEdge optimisers.
  • At Solen Energy we an in-house team of expert designers who will plan your custom solar system based on industry-leading technology.

Components


High-bead rail HK 125 XL 50

For horizontal installation of modules on trapezoidal sheet roofs.


sflex-wood-screws

Sheet metal screws

Our sheet-metal screw is approved by building authorities and guarantees high pull-out values. Clean, chip-free installation in one step without pre-drilling.


End and mid clamps

S:FLEX module clamps have an extremely wide clamping area and are therefore suitable for all standard modules and frame heights of 30-50 mm. High torsion resistance and our latest, ultra-smooth one-click technology make installation a snap.


End and mid clamps Hawk HK

Module clamps with a wide clamping area and one-click technology for smooth module installation.


Downloads


An assembly instruction for the HK 125 XL 50 with clamps is available here:

S:FLEX assembly instructions HK 125 XL 50

Planning & Support


If you would like to take advantage of our planning support, you can:

Help Centre

sflex
GSE
vdv
saj