S:FLEX mounting systems for trapezoidal and corrugated sheet metal roofs and roofing sheets


Horizontal module installation with longitudinal sheet metal rail ST-AK 1/12.

The advantages of the ST-AK 1/12:

  • Fast and direct attachment of the rails with rivets or sheet-metal screws on the raised seams.
  • Horizontal module orientation, variable size of module array.
  • Economically optimised system thanks to low material, logistics and installation costs.
  • ST-AK 1/12 complete / l=180 mm is delivered pre-assembled with 2 holes each (5 mm / 6.5 mm / 8.5 mm) and sealing tape as standard.
  • Made of weather-resistant aluminium.

Components


Longitudinal sheet metal rail ST-AK 1/12

For horizontal installation of modules on trapezoidal sheet metal roofs.


sflex-wood-screws

Sheet metal screws

Our sheet-metal screw is approved by building authorities and guarantees high pull-out values. Clean, chip-free installation in one step without pre-drilling.


End and mid clamps

S:FLEX module clamps have an extremely wide clamping area and are therefore suitable for all standard modules and frame heights of 30-50 mm. High torsion resistance and our latest, ultra-smooth one-click technology make installation a snap.


Downloads


A data sheet with information about our systems for trapezoidal and corrugated sheet metal roofs is available here:

S:FLEX trapezoidal and corrugated sheet metal systems
Sflex assembly instructions

Here are the assembly instructions for the longitudinal sheet metal rail ST-AK 1/12:

S:FLEX assembly instructions ST-AK 1/12

Planning & Support


If you would like to take advantage of our planning support, you can:

Solar Panel Mounting Systems

sflex
GSE
vdv
clearance

S:FLEX mounting systems for trapezoidal and corrugated sheet metal roofs and roofing sheets


Horizontal module installation with longitudinal sheet metal rail ST-AK 1/12.

The advantages of the ST-AK 1/12:

  • Fast and direct attachment of the rails with rivets or sheet-metal screws on the raised seams.
  • Horizontal module orientation, variable size of module array.
  • Economically optimised system thanks to low material, logistics and installation costs.
  • ST-AK 1/12 complete / l=180 mm is delivered pre-assembled with 2 holes each (5 mm / 6.5 mm / 8.5 mm) and sealing tape as standard.
  • Made of weather-resistant aluminium.

Components


Longitudinal sheet metal rail ST-AK 1/12

For horizontal installation of modules on trapezoidal sheet metal roofs.


sflex-wood-screws

Sheet metal screws

Our sheet-metal screw is approved by building authorities and guarantees high pull-out values. Clean, chip-free installation in one step without pre-drilling.


End and mid clamps

S:FLEX module clamps have an extremely wide clamping area and are therefore suitable for all standard modules and frame heights of 30-50 mm. High torsion resistance and our latest, ultra-smooth one-click technology make installation a snap.


Downloads


A data sheet with information about our systems for trapezoidal and corrugated sheet metal roofs is available here:

S:FLEX trapezoidal and corrugated sheet metal systems
Sflex assembly instructions

Here are the assembly instructions for the longitudinal sheet metal rail ST-AK 1/12:

S:FLEX assembly instructions ST-AK 1/12

Planning & Support


If you would like to take advantage of our planning support, you can:

Solar Panel Mounting Systems

sflex
GSE
vdv
clearance